● Curved side gate structural box body ( high – strength plate ) and frame – type structural box body are optional ;
● All parts that are subject to friction for being in contact with garbage such as rear loader plate are of high – strength wear plate , which is able to withstand the repeated shock and friction due to compression of garbage ;
● All key components such as guide rails of compression mechanism are of machined parts ; the sliding blocks are of high – strength nylon ; all parts are precisely fit to ensure smooth operation ;
● Proximity switches, which are capable of non – contact sensor switching , are employed to control the action of compression mechanism ; it is not only reliable and stable but also is obviously energy – saving ;
● The hydraulic system is of dual – pump dual – loop system and is enjoying a prolonged service life of hydraulic system and significantly reduced energy consumption ;
● Imported multiple valves are employed to make bi – directional compression possible; it is featured by reliable performance and high garbage compression density ;
● Operating system can be electrically and manually controlled ; it is convenient to operate with manual operation as an auxiliary option ;
● The compression mechanism is able to compress the garbage in both single – cycle and automatic continuous cycle modes and is able to reverse in case of jamming ;
● The rear loader is configured with lifting , discharging and automatic cleaning functions and it can be more conveniently used ;
● Electrical - control automatic acceleration & constant speed device can not only meet requirements for loading efficiency but also can efficiently limit the oil consumption and reduce the noise level ;
● Hydraulic automatic locking mechanism is employed at the joint between front box body and rear loader ; U sealing rubber strip that ensures reliable sealing is used to effectively avoid the leaking of sewage during loading and transportation of garbage ;
Model | QDT5120ZYSE |
Chassis model | DFL1120B1 |
Engine type | ISDe180 30( optional as per requirement ) |
Rated power ( kw ) | 132 |
Laden mass rating ( kg ) | 3125,3425 |
Kerb mass ( kg ) | 9170,8870 |
Gross mass ( kg ) | 12490 |
Maximum speed ( km / h ) | 90,110 |
Tyre size | 9.00-20( optional as per requirement ) |
Overall dimensions ( L x W x H )( mm ) | 7450,7250×2500×3000 |
Wheelbase ( mm ) | 3650 |
Front overhang / rear overhang ( mm ) | 1430/2370,1430/2170 |
Approach angle / departure angle (°) | 20/14 |
Compartment effective volume (m3) | 10.5 |
Loader volume (m3) | 1.9 |
Hydraulic system pressure rating ( Mpa ) | 19 |
Ground clearance of lower edge of filler port ( mm ) | Appr .1130 |
Time for loader to complete one work cycle ( s ) | ≤25 |
Time for push plate to complete discharging garbage ( s ) | ≤40 |
Sump tank volume ( L ) | ≥200 |
Manipulator turn – over mass ( kg ) | ≥600 |
Garbage compression density ( kg /m3) | ≥800 |